The TS350 Series Digital Fluid Dispenser/Controller is equipped with a digital timer, pressure, and vacuum read-out on a large LCD screen. The user-friendly firmware provides the option of programming up to 10 varied, sequenced, or individual shots. This system has a user-programmable manual (purge) and automatic dispense cycle settings (program and time), and features a "Teach Mode" for determining the dispensing time required when the dispensing output is unknown.

Two operating pressures are available: TS350 (1 -100 psi/0.07 - 6.9 bar for general applications), and TS355 (0 - 15 psi/0.07 - 1.0 bar for specific low-viscosity applications).

Cycle Rate	1,200 cycles/minute
Timing Range	0.008 - 60.000 seconds
Timing Repeat Tolerance	+/- 0.001%
Input Pressure	100 psi (6.9 bar) Maximum
Operating Pressure (TS350)	1 - 100 psi (0.07 - 6.9 bar)
Dispense Modes	Timed, Interrupt, Teach, and Purge
Meets or Exceeds	CE, TUV-GS and NRTL

• Universal power supply with snap-on plug for worldwide use 
•  User programmable manual purge and automatic dispense cycle settings (program and time) 
• 10 programmable memories for storing and recalling most frequently used dispensing cycle timing
• ''Teach Mode'' for determining the dispensing time required when dispensing output is unknown
• Digital timing from 0.008-60.000 seconds 
• +/- 0.001% Timing repeat tolerances 
• Digital pressure and vacuum read out 
• Adjustable vacuum-driven ''suck back'' to control material ''tailing'' and waste 
• Stable to conserve work space when multiple TS-350/355 units are used together.
• Tactile-responsive user programming buttons 
• Large, clearly marked air pressure and vacuum control knobs 
• Digitally displayed pressure in ''psi'' or ''bar''
• High visibility, 20 x 4 LCD display panel with back lighting
• Accessories included: Universal power adapter, foot switch, syringe barrel stand, 10cc receiver head, air hose with fittings, cable holder and sample dispensing tips