Timer, Traceable® Clip-It Timer Abso™
Specifications
Clip-It Timer counts down, alarms, and functions as a stopwatch. Clip it to anything.
Alarm sounds for 60 seconds.
Functions as a stopwatch as well.
The handiest timer ever designed clips to your lab coat, belt, notebook, clipboard, or anywhere. You’ll never lose your own personal timer.
Four-digit LCD display always shows the time remaining in hours and minutesProgram it in the countdown mode, in 1-minute increments, from 20 hours to 1 minute. At zero, a loud-beeping alarm sounds for 60 seconds or may be silenced manually. In the stopwatch mode, it times from 1 second to 20 minutes and then repeats. Also has a time-out feature in both up and down counting.
Notifies you when to read a color change, remove a sample from an oven, or go to a meeting. Big-digit, 1/3-inch-high display is easy to read. Three-button operation is quick and intuitive (no need to ever read the directions). Stopwatch operation takes just the press of a single button.
Individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).
Clip-It Timer has a rugged, chemical-resistant ABS case, quartz-crystal 0.01% accuracy, magnet for placing on metal, and a 1-1/2-year, continuous-use, replaceable silver-oxide battery.
Dimensions are 2 x 1-1/2 x 3/4 inches. Weight is just 1/2 ounce.
Clip-It Timer counts down, alarms, and functions as a stopwatch. Clip it to anything.
Alarm sounds for 60 seconds.
Functions as a stopwatch as well.
The handiest timer ever designed clips to your lab coat, belt, notebook, clipboard, or anywhere. You’ll never lose your own personal timer.
Four-digit LCD display always shows the time remaining in hours and minutesProgram it in the countdown mode, in 1-minute increments, from 20 hours to 1 minute. At zero, a loud-beeping alarm sounds for 60 seconds or may be silenced manually. In the stopwatch mode, it times from 1 second to 20 minutes and then repeats. Also has a time-out feature in both up and down counting.
Notifies you when to read a color change, remove a sample from an oven, or go to a meeting. Big-digit, 1/3-inch-high display is easy to read. Three-button operation is quick and intuitive (no need to ever read the directions). Stopwatch operation takes just the press of a single button.
Individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).
Clip-It Timer has a rugged, chemical-resistant ABS case, quartz-crystal 0.01% accuracy, magnet for placing on metal, and a 1-1/2-year, continuous-use, replaceable silver-oxide battery.
Dimensions are 2 x 1-1/2 x 3/4 inches. Weight is just 1/2 ounce.
Product Description
Timer, Traceable® Clip-It Timer Abso™
Specifications
Clip-It Timer counts down, alarms, and functions as a stopwatch. Clip it to anything.
Alarm sounds for 60 seconds.
Functions as a stopwatch as well.
The handiest timer ever designed clips to your lab coat, belt, notebook, clipboard, or anywhere. You’ll never lose your own personal timer.
Four-digit LCD display always shows the time remaining in hours and minutesProgram it in the countdown mode, in 1-minute increments, from 20 hours to 1 minute. At zero, a loud-beeping alarm sounds for 60 seconds or may be silenced manually. In the stopwatch mode, it times from 1 second to 20 minutes and then repeats. Also has a time-out feature in both up and down counting.
Notifies you when to read a color change, remove a sample from an oven, or go to a meeting. Big-digit, 1/3-inch-high display is easy to read. Three-button operation is quick and intuitive (no need to ever read the directions). Stopwatch operation takes just the press of a single button.
Individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).
Clip-It Timer has a rugged, chemical-resistant ABS case, quartz-crystal 0.01% accuracy, magnet for placing on metal, and a 1-1/2-year, continuous-use, replaceable silver-oxide battery.
Dimensions are 2 x 1-1/2 x 3/4 inches. Weight is just 1/2 ounce.
Clip-It Timer counts down, alarms, and functions as a stopwatch. Clip it to anything.
Alarm sounds for 60 seconds.
Functions as a stopwatch as well.
The handiest timer ever designed clips to your lab coat, belt, notebook, clipboard, or anywhere. You’ll never lose your own personal timer.
Four-digit LCD display always shows the time remaining in hours and minutesProgram it in the countdown mode, in 1-minute increments, from 20 hours to 1 minute. At zero, a loud-beeping alarm sounds for 60 seconds or may be silenced manually. In the stopwatch mode, it times from 1 second to 20 minutes and then repeats. Also has a time-out feature in both up and down counting.
Notifies you when to read a color change, remove a sample from an oven, or go to a meeting. Big-digit, 1/3-inch-high display is easy to read. Three-button operation is quick and intuitive (no need to ever read the directions). Stopwatch operation takes just the press of a single button.
Individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).
Clip-It Timer has a rugged, chemical-resistant ABS case, quartz-crystal 0.01% accuracy, magnet for placing on metal, and a 1-1/2-year, continuous-use, replaceable silver-oxide battery.
Dimensions are 2 x 1-1/2 x 3/4 inches. Weight is just 1/2 ounce.
Product Videos
Custom Field
Specifications
Clip-It Timer counts down, alarms, and functions as a stopwatch. Clip it to anything.
Alarm sounds for 60 seconds.
Functions as a stopwatch as well.
The handiest timer ever designed clips to your lab coat, belt, notebook, clipboard, or anywhere. You’ll never lose your own personal timer.
Four-digit LCD display always shows the time remaining in hours and minutesProgram it in the countdown mode, in 1-minute increments, from 20 hours to 1 minute. At zero, a loud-beeping alarm sounds for 60 seconds or may be silenced manually. In the stopwatch mode, it times from 1 second to 20 minutes and then repeats. Also has a time-out feature in both up and down counting.
Notifies you when to read a color change, remove a sample from an oven, or go to a meeting. Big-digit, 1/3-inch-high display is easy to read. Three-button operation is quick and intuitive (no need to ever read the directions). Stopwatch operation takes just the press of a single button.
Individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).
Clip-It Timer has a rugged, chemical-resistant ABS case, quartz-crystal 0.01% accuracy, magnet for placing on metal, and a 1-1/2-year, continuous-use, replaceable silver-oxide battery.
Dimensions are 2 x 1-1/2 x 3/4 inches. Weight is just 1/2 ounce.
Clip-It Timer counts down, alarms, and functions as a stopwatch. Clip it to anything.
Alarm sounds for 60 seconds.
Functions as a stopwatch as well.
The handiest timer ever designed clips to your lab coat, belt, notebook, clipboard, or anywhere. You’ll never lose your own personal timer.
Four-digit LCD display always shows the time remaining in hours and minutesProgram it in the countdown mode, in 1-minute increments, from 20 hours to 1 minute. At zero, a loud-beeping alarm sounds for 60 seconds or may be silenced manually. In the stopwatch mode, it times from 1 second to 20 minutes and then repeats. Also has a time-out feature in both up and down counting.
Notifies you when to read a color change, remove a sample from an oven, or go to a meeting. Big-digit, 1/3-inch-high display is easy to read. Three-button operation is quick and intuitive (no need to ever read the directions). Stopwatch operation takes just the press of a single button.
Individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).
Clip-It Timer has a rugged, chemical-resistant ABS case, quartz-crystal 0.01% accuracy, magnet for placing on metal, and a 1-1/2-year, continuous-use, replaceable silver-oxide battery.
Dimensions are 2 x 1-1/2 x 3/4 inches. Weight is just 1/2 ounce.
