Surface Resistance Meter Kit

• • NEW Large OLED Display
    Displays resistance mantissa and exponent, temperature, relative humidity and test voltage
  • NEW Internal Memory
    Stores and recalls up to 100 measurements. Captures resistance, temperature, humidity and test voltage.
  • NEW Measurement Stability Modes
    Sets the 15-second electrification period for test requirements*
  • NEW Electrode Spacers
    Spaces the 5 lbs. electrodes to 10 and 36 inches for resistance point-to-point (Rtt) measurement requirements of ANSI/ESD S.1 and ANSI/ESD S4.1
  • NEW Measurement Location Labels (Pack of 25)
    Labels and tracks areas and materials measured for surface resistance
  • Digital Compliance Verification Surface Resistance Meter Kit
    Measures resistance point-to-point (Rtt) and resistance-to-ground (Rtg) of worksurfaces, flooring systems, garments, packaging, and other materials in accordance with ESD Association documents: ESD TR53, ANSI/ESD S4.1, ANSI/ESD S7.1, ANSI/ESD STM97.1 and others
  • Resistance Range: 1.0 x 10³ to 1.0 x 10¹² Ohms
    Determines if a surface is conductive, dissipative or insulative for ESD control applications in electronics manufacturing or handling environments
  • Under Load Test Voltages (10V or 100V ±5%)
    Meets ANSI/ESD S20.20 resistance testing requirements for product qualification and compliance verificationMeasures surface resistance per ANSI/ESD STM11.11 and volume resistance per ANSI/ESD STM11.12 of planar material
  • Meets resistance measurement requirements of TR53, ANSI/ESD STM97.1 and other documents
  • NIST Calibrated – Original Calibration Certificate Available
    Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. 
  • Made in the United States of America

  Kit Includes:
  1    Digital Surface Resistance Meter
  2    Test Leads, 5' Length 
  2    5 lbs. Electrodes
  1    Electrode Spacer, 10" 
  1    Electrode Spacer, 36" 
  4    AA Alkaline Batteries
  1    Ground Plug Adapter
  1    Gator Clip
  25  Measurement Location Labels
  1    Plastic Carrying Case
  1    Certificate of Calibration

  *Measurement Stability Modes:
  Auto Stabilization enables a 15-second electrification period when the measured resistance is 1 x 10¹⁰ ohms or greater to maintain test accuracy.

  Fixed Stabilization complies with ANSI/ESD S4.1 and enables a 15-second electrification period when the measured resistance is 1 x 10⁶ ohms or greater.