ESD Test & Measurement

Meter, Surface Resistivity

Specifications This SRM 310 uses parallel electrodes and concentric rings to accurately measure RTT, RTG, or resistivity for periodic verification, factory audits or test lab evaluation of product. This meter is designed to verify incoming materials...

Meter, Low Resistance Tester

Specifications   LOW RESISTANCE TESTER Compliance Verification for Grounding SystemsMeasures the grounding path resistance of banana jacks and other equipment Pass / Fail Selectable Test Ranges: <1 Ohm, <2 Ohms, and <10 OhmsDesigned to...

Static Field Meter, Digital

Specifications STATIC FIELD METER, DIGITAL Electrostatic Field MeterMeasures static charge and polarity on objects up to ±19.99 kV at a distance of 1 inch Chopper-Stabilized SensorYields accurate measurements in both normal and ionized...

Multi Ground Hub

Specifications MULTI-GROUND HUB   Brass Machined Hex Block with Six Banana Jacks and Six Screws for #8 Ring TerminalsGrounding points for wrist straps, ground cords, tools and other items. Connect to other grounding hubs for additional grounding...

Digital Static Field Meter Ionization Verification Kit

Specifications KIT, COMPLETE, FIELD METER/ION TEST Ionization Verification Kit for Measuring Offset Voltage and Discharge TimesUse to measure performance specifications of ionizers in the actual area of use. Measures static charge and polarity on...

Tester, Wrist Strap, 9V Battery

Specifications   TESTER, WRIST STRAP, 9V DC BATTERY Tests Path To Ground and Presence of an Inline 1 Megohm Resistor in Wrist StrapDetermines that operator’s personal grounding device* is functioning correctly. 9 Volt Battery Power...

Tester, Combo,Wrist Strap and Foot Grounder

Specifications TESTER, COMBO WRIST STRAP AND FOOT GROUND Tests Operator’s Path-To-Ground; Wrist Strap limits 750 kilohms to 10 megohms; Footwear limits 750 kilohms to 100 megohms*Determines that operator’s personal grounding device** is...

Meter, Surface Resistance Test Kit

Specifications Surface Resistance Meter Kit NEW Large OLED DisplayDisplays resistance mantissa and exponent, temperature, relative humidity and test voltage NEW Internal MemoryStores and recalls up to 100 measurements. Captures resistance,...

Wrist Strap and Foot Grounder Calibration Unit, NIST STD

Specifications   CALIBRATION UNIT, NIST STD WRIST STRAP & FOOT GROUNDER Passive device NIST traceableAllows in-house NIST traceable calibration Wrist strap test range:750 Kilohm - 100 Megohm Foot ground test range:750 Kilohm - 100...

Tester, Combo,Wrist Strap and Foot Grounder with Foot Plate

Specifications   Tests Operator’s Path-To-Ground; Wrist Strap limits 750 kilohms to 10 megohms; Footwear limits 750 kilohms to 100 megohms*Determines that operator’s personal grounding device** is functioning correctly. Separate Test...

Tester, Combo,Wrist Strap and Foot Grounder with Stand

Specifications TESTER, COMBO WRIST STRAP & FOOT GROUND, W/STAND Tests Operator’s Path-To-Ground; Wrist Strap limits 750 kilohms to 10 megohms; Footwear limits 750 kilohms to 100 megohms*Determines that operator’s personal grounding...

Tester, Wrist Strap

Specifications WRIST STRAP TESTER, 2 STATE, TOUCH NIST Connects to utility ground when plugged inQuick, easy installation and grounding of both wrist straps and table mats. Tests entire circuit - wrist strap, cord and skin contactReliable resistance...