Desco

Sole Grounder with Snap-Loc

Specifications   Sole Grounder with Snap-Loc 0.080"  thick dual layer rubber with a black conductive outer layer and a non-marring inner layer. To prevent the rubber from tearing it is reinforced with tear resistant nylon. 30" long blue...

Mat, Dissipative Two Layer .06″ Rubber ESD Mat

Specifications   Botron’s Dissipative Two Layer Rubber ESD Mat is hands down the best choice for a dissipative surface. While most matting relies on a very thin conductive layer (think carbon paper), Botron’s ESD rubber matting is...

Meter, Surface Resistivity

Specifications This SRM 310 uses parallel electrodes and concentric rings to accurately measure RTT, RTG, or resistivity for periodic verification, factory audits or test lab evaluation of product. This meter is designed to verify incoming materials...

Wave Distortion Monitor Verification Tester

Specifications   Wave Distortion Monitor Verification Tester Calibration VerificationChecks the test limits of Desco Wave Distortion Monitors without removing them from their workstations NEW Extruded Aluminum EnclosureShields the tester from...

Ground Plug Adapter

Specifications GROUND PLUG ADAPTER Banana Jack (.162” - .164” ± .002” ID) Outlet AdaptorConverts a standard outlet into a groundable point for wrist straps and other grounding hardware with banana plugs. Made in The United...

Gloves, ESD Inspection, ESD

Specifications   ESD Inspection Gloves Dissipative (10E5-10E8 ohms) Thunderon® Fibers Electrically bonds through grounded operator and produces no charge generation. Kevlar Kleen® Carrier YarnProtects the operator’s hands from cuts...

Mat, Statfree B2 Plus Layer Vinyl Series

Specifications Statfree B2 Dissipative 2-Layer Blue Vinyl Roll Dissipative 2-Layer ESD WorksurfaceProvides a worksurface that does not generate a static charge and will control the discharge rate from all conductors (including ESD susceptible items)...

Statguard Vinyl Tile, White, 12'" x 12"

Specifications   VINYL TILE, STATGUARD, WHITE GREY   1/8' x 12' x 12', BOX OF 45 Resilient ESD High Gloss, Durable Vinyl Tile100% pure homogeneous vinyl with proprietary ESD flooring composition. Precision CutAllows the tiles to be laid...

Shop Traveller, Static Dissipative w/ Pocket

Specifications SHOP TRAVELER, 6 MIL, 10'' X 12'', W/POCKET, 25 PACK 6 Mil Heavy Weight, Top Loading Designed for holding paperwork (8-1/2”x11”) in ESD Protected Areas.  Triboelectric Charge Generation is Negligible Tested per...

Label, Equipment Containing ESDS, 3/4" x 2", 500/rl

Specifications   LABEL, EQUIPMENT CONTAINING ESDS 3/4'' x 2'', ROLL OF 500 Label for equipment that contains ESDSIdentifies equipment that when opened has ESD sensitive (ESDS) items that are susceptible to ESD damage 3' core, 500 labels per...

Label, ESD Protective Symbol, 1" x 1"

Specifications   LABEL, ESD PROTECTIVE SYMBOL 1''x1'', PERMANENT, 1000/RL 1 Inch x 1 Inch ESD Protective Symbol Label Identifies that the labeled item as ESD protected Permanent Adhesive For one-time use when the label will remain intact and...

Label, Compliance Verification, 1.5" x 2",1000/rl

Specifications   LABEL, COMPLIANCE VERIFICATION 1.5'' x 2'', REUSEABLE, 1000/RL 1 Inch x 2 Inch ESD Control Item Tested Label per ESD TR53Identifies that the labeled item has been tested to be used as part of an ESD Control Plan Permanent...

Mat, Statfree UC2 2-Layer Ultra Clean

Specifications   Statfree UC Dissipative Dual Layer Ultra Clean Blue Rubber Roll Dissipative (1 x 106 to < 1 x 109 ohms Rtt) Colored Top LayerMeets ANSI/ESD S20.20 worksurface required limit and recommendation of ANSI/ESD S4.1 for contact...

Label, ESD Control Item Tested, 1" x 2"

Specifications   LABEL, ESD CONTROL ITEM TESTED 1''x2'', PERMANENT, 1000/RL 1 Inch x 2 Inch ESD Control Item Tested Label per ESD TR53Identifies that the labeled item has been tested to be used as part of an ESD Control Plan Permanent...

Label, Class 0A, Permanent Adhesive, 2" x 2", 500/Roll

Specifications LABEL,CLASS 0A, PERMANENT ADHESIVE, 2''x2'', ROLL OF 500 Identifies devices that are less than 250 volts HBM 2' x 2', 500/roll, permanent adhesive Lead-free RoHS compliant Made in the United States of America